(New) Industrial – Caringbah

Industrial Asbestos Removal in Caringbah

We started off with an asbestos roof:

Prior to start of works the roof was sprayed with a low pressure spray machine using a quality PVA to seal all surfaces.

All equipment and stock on the inside are covered with 200um plastic.
 
A waste bin is twice lined with 200 um plastic as required by the regulations.
 
Removal takes place and all asbestos waste is lowered into bin by crane.
New .48 zincalume corrugated custom orb sheeting is installed with 55mm anticon insulation under sheeting.
 
New Colorbond box gutters installed and re-falled to allow maximum egress of water and no ponding!!
 
New preformed flashings of .6 zincalume to ensure a watertight seal.

Another job well done by the lads at ARMOUR ROOFING!! Learn more about asbestos awareness below and let’s get rid of the asbestos roofs once and for all in Australia!

Bernie Banton Foundation